|
Equipment
|
PLC based Photostability chamber (Also available in controller based )
|
|
|
Control system
|
Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile
|
|
|
Refrigeration system
|
An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser
|
|
|
|
Air circulation
|
To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC
|
|
|
Heating system
|
SS. U shaped nichrome wire
|
|
|
Insulation
|
80 mm sheet of PUF (Poly Urethane Foam)
|
|
|
Trays
|
Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
|
|
|
Illumination
|
LED light is provided for bright illumination and low power consumption
|
|
|
Fault Indications
|
Audio visual indication is provided for all types of fault occur in the chamber
|
|
|
Validation port
|
A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
|
|
|
Sensors
|
PT 100 sensor to sense temperature
|
|
|
software
|
CDAQ complying 21 CFR part 11
|
|
|
Optional features
|
To avoid critical conditions and for ease of operation
|
|
|
·Standby refrigeration system
|
|
|
·Hooter
|
|
|
·GSM technology
|
|
|
·Extra trays
|
|
|
Extra sensor
|
|
|
Certification
|
ISO 9001:2015
|
|
| New Feature |
A direct access to chamber is possible via mobile using IOT device
|
|
|
Illumination for photo
stability test
|
Fluorescent tubes for day light effect and U.V. tubes for ultra-violet rays
in accordance to ICH guidelines requirement of lightning Energy
|
|
Wireless access
|
A direct access to chamber is possible via mobile using IOT device
|
|
|
SPECIFICATION
|
|
Temperature Range
|
20 to 60° C
|
|
Accuracy
|
± 0.2° C
|
|
Uniformity
|
± 1° C
|
|
Sizes
|
|
Model
|
Capacity In litres
|
Internal Size in mm (WxDxH)
|
External Size in mm (WxDxH)
|
No. of trays
|
|
CBp1.25
|
125
|
500x500x500
|
670x960x1150
|
2
|
|
CBp2
|
200
|
500x500x800
|
670x960x1450
|
2
|
|
CBp3
|
300
|
550x500x1100
|
720x960x1750
|
3
|
|
CBp4
|
400
|
650x550x1130
|
820x1010x1780
|
4
|
|
CBp6
|
600
|
750x700x1150
|
920x1160x1800
|
4
|
For CB1 model
Inner body will be constructed by SS304 (dull finishing)
Outer body will be constructed by GI powder coating (matt finishing)
For CB2 model
Inner body will be constructed by SS 304 or ss316 as per requirement (dull finishing)
Outer body will be constructed by SS 304 (dull finishing)
